How to Install DTECH DT-5019 Driver 16 for Windows 10
How to Install DTECH DT-5019 Driver 16 for Windows 10
DTECH DT-5019 is a USB2.0 to RS422/485 cable that can convert USB signals to RS422 or RS485 signals. It is compatible with various devices such as industrial control equipment, PLC, POS, barcode scanner, etc. It supports Windows 7, 8, 10, Mac OS and Linux operating systems.
dtech dt-5019 driver 16
In this article, we will show you how to install DTECH DT-5019 driver 16 for Windows 10. This driver is the latest version that can improve the performance and stability of the cable.
Step 1: Download the driver
You can download the driver from the official website of DTECH Electronics. Go to this page and find the file named "DT-5019 driver for WIN7/8/10". Click on the download button and save the file to your computer.
Step 2: Unzip the file
The downloaded file is a zip file that contains the driver and a user manual. You need to unzip the file before installing the driver. You can use any software that can extract zip files, such as WinRAR or 7-Zip. Right-click on the file and choose "Extract here" or "Extract to DT-5019 driver for WIN7/8/10". You will get a folder with the same name.
Step 3: Install the driver
Open the folder and double-click on the file named "Setup.exe". This will launch the installation wizard. Follow the instructions on the screen to complete the installation. You may need to restart your computer after the installation.
Step 4: Connect the cable
After installing the driver, you can connect the cable to your computer and your device. Plug one end of the cable into a USB port on your computer and plug the other end into your device's RS422 or RS485 port. Make sure you use the correct port according to your device's specifications.
Step 5: Test the cable
To test if the cable is working properly, you can use a software that can communicate with RS422 or RS485 devices, such as HyperTerminal or PuTTY. You need to configure the software with the correct parameters such as baud rate, data bits, stop bits, parity, etc. You can find these parameters in your device's manual or on its label. You also need to select the correct COM port that corresponds to your cable. You can check this in Device Manager under Ports (COM & LPT).
Once you have configured the software, you can send and receive data from your device using the cable. If everything works fine, you have successfully installed DTECH DT-5019 driver 16 for Windows 10.
Troubleshooting tips
If you encounter any problems while using the cable, you can try the following tips:
Make sure you have installed the correct driver for your operating system and cable version.
Make sure you have connected the cable to the right ports on your computer and device.
Make sure you have configured the software with the right parameters for your device.
Make sure you have selected the right COM port for your cable in Device Manager and in the software.
Try to disconnect and reconnect the cable or restart your computer and device.
Try to use a different USB port or a different computer or device.
Try to update the driver or the firmware of your cable or device.
Contact DTECH Electronics customer service if none of the above tips work.
Features and specifications
DTECH DT-5019 is a high-quality and reliable cable that has the following features and specifications:
USB2.0 interface, plug and play, no external power supply needed.
Supports RS422 and RS485 standards, automatic detection and switching.
Supports baud rate from 300bps to 921600bps.
Supports data bits from 5 to 8, stop bits from 1 to 2, parity of none, odd, even, mark and space.
Supports flow control of none, RTS/CTS and XON/XOFF.
Supports ESD protection of Â15KV.
Supports surge protection of 600W per line.
Supports up to 32 devices in RS485 mode.
Supports up to 1200m transmission distance in RS485 mode.
Compatible with Windows 7, 8, 10, Mac OS and Linux operating systems.
Cable length: 1.5m
Cable weight: 80g
e0e6b7cb5c